Over time, shower doors tend to get dirtier too quickly. I mean, like, even when cleaned on a regular basis, some stains’ buildup is inevitable. Dirt, soap scum, and hard water stains, are the main culprits contributing to the shower door’s dirtiness. Luckily, there are some products such as WD-40 that you can use to get rid of these pesky stains. WD40, unlike other products, helps you tackle all stubborn stains and restore your glass shower door’s shine in no time. And its secret relies upon the way you use it.
Now, you might be wondering how to properly use this product to get the results you want. In this step-by-step guide, We will walk you through everything you need. From the precautions to little tricks, this article will cover everything.
Table of Contents
How to Clean Shower Doors with WD40
Start by spraying a good amount of WD40 all over your glass shower door. Leave the product to act for around 15-20 minutes based on how dirty your door is. Then, using a microfiber towel, wipe off the whole door. We recommend using a microfiber cloth to avoid scratching your door, especially if it is made of glass.
Remark: Don’t freak out in case your door appears cloudy at first. It’s perfectly normal. Everything will get off once you start wiping your door. Also, some tenacious stains will require the use of a scrubbing brush. However, to avoid damaging your door, we recommend scrubbing gently.
Reapplying WD40 can be necessary for some situations, especially if you’re dealing with a stubborn stain. This is very normal and harmless for your shower door. Simply spray the area you want to clean and wipe it down in the same way as in the previous step.
Once you’ve finished all the steps and your glass is sparkling, avoid rinsing your door with water. Just leave it as it’s. What is remarkable with WD40 is its water displacement properties. In other words, it won’t only remove all dirt from your glass door, but it will also protect it from future stains.
That’s it. These are the steps you need to follow in cleaning your shower glass door with WD40. Easy right!! However, before you start cleaning your shower door, please take the equipment we’re going to mention below.
Safety Precautions
We strongly recommend avoiding breathing WD40 vapor or having direct skin contact with this substance. This latter is hazardous to the human body and may result in health problems. As a result, here’s what we recommend doing when using WD40.
- Wear a face mask that covers both your nose and mouth to avoid inhaling WD40 mist.
- Wear rubber gloves to avoid any skin contact with the product.
- Before you start using WD40, we recommend ensuring good ventilation inside your shower.
Alternatives to WD-40
Vinegar & Water
Mix a good amount of white vinegar with water on a spray bottle. Spray the solution on your shower door and let it act for around 10-15 minutes. This period should be more than enough for the mixture to tackle any stubborn stain.
After that, rinse your shower door with water, and voilà, it’s sparkling once more. This solution is actually inexpensive, yet, its results are spectacular. Also, just like the WD40, this technique does not require too much work.
White Vinegar & Baking Soda
If you’re tired of mixing every ingredient with water and you want something unique, then here is what you’re looking for.
Simply mix white vinegar with a few tbsp of baking soda and blend the mixture well until you form a paste. Apply this latter to your shower door and leave it to act for like 10-15minutes. Then, scrub your shower door gently using a soft brush and rinse it with water.
Frequently Asked Questions
Is WD-40 Good for Cleaning Glass?
WD40 is an excellent product that can be relied on to remove all stains from glass. You can also use it on your glass shower door to remove any accumulated buildup and protect it from future stains.
Does WD-40 Keep Hard Water Stains Off Glass Shower Doors?
It does. Simply spray it with WD-40 and wipe it down with a microfiber towel. That’s all you need to do to restore the attractiveness of your shower doors.
Does WD-40 Damage Shower Glass Doors?
You should not be worried about cleaning shower glass with WD40 since the results it offers are, most of the time, positive.
However, if you still feel uncomfortable using it, you can test it on a hidden part of your glass door and wait. If it appears to be safe for your door, you can thus use it to clean the whole surface.
Conclusion
We hope our guide on how to clean shower doors with WD40 allows you to restore the beauty of your shower without any significant effort.
For curious readers, we’ve recently revealed plenty of secrets that hotel owners use to keep their shower doors gleaming. And I can guarantee that you also use the same techniques as them and enjoy great results.
Lastly, don’t forget to share this guide on social media so you can help your friends and family member to keep their showers fresh and clean.
Can you clean shower door with WD-40?
While WD-40 can be used to remove hard water stains and soap scum buildup on shower doors, it is not recommended to use it as a regular cleaning solution. It is always best to use cleaning products specifically designed for cleaning shower doors to avoid any potential damage to the surface.
What is the fastest way to clean shower doors?
One of the fastest ways to clean shower doors is to use a mixture of vinegar and water or baking soda and water. Spray the solution onto the doors, scrub them with a non-scratch sponge, and rinse with water. Another quick method is to use a commercial glass cleaner or a magic eraser sponge.
Does WD-40 damage glass?
WD-40 is generally safe to use on glass, but it is not recommended to use on surfaces that are painted, varnished, or plastic. It is always a good idea to test a small, inconspicuous area first before using it on a larger surface.
Does WD-40 get rid of limescale?
Yes, WD-40 can be used to remove limescale from surfaces. However, it is not the most effective or recommended method as there are other products specifically designed for this purpose. Additionally, WD-40 should be used with caution as it can leave behind an oily residue and can be difficult to clean off.
Can you leave WD-40 overnight?
Yes, it is safe to leave WD-40 on surfaces overnight. However, it’s best to wipe off any excess after a few minutes to prevent attracting dust or dirt.
How long does WD-40 last when sprayed?
The effectiveness of WD-40 can vary depending on the application and conditions, but typically, it can last for several weeks to several months after being sprayed. However, this can also depend on factors such as humidity, temperature, and the amount of use or exposure to the elements.
We're an affiliate
We hope you love the products we recommend! Just so you know, CleanyHome.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by linking to Amazon.com.
