Quick Shine is one of the best ways to bring your floor back to life. Nevertheless, there are situations when the results aren’t what we anticipated. It could be due to our high expectations for the product or simply because of some imperfections. Either way, you know that you’ve got no other option other than striping the coating you’ve just applied to your floor. Now I want to tell you how to remove Quick Shine from floors.
In this guide, we will walk you through all of the effective methods for removing Quick Shine from your floor. Without further ado, let’s get started.
Table of Contents
How to Remove Quick Shine from Floors Like a Pro
Quick Shine Deep Cleaner
If you don’t mind investing in a commercial product, I highly recommend getting Quick Shine Deep Cleaner. It’s a product designed specifically to remove Quick Shine from floors. It is suitable for hardwood, laminate, tile, stone floors…etc.
Once you have the product on hand, here’s what you should do. In a bucket, dilute one cup of Quick Shine Deep Cleaner with one gallon of hot water.
Apply the solution to your floor and let it work its magic. You should only work on small sections at a time since you don’t want the solution to dry on your floor.
Then, scrub the area with a rough-sided sponge or steel wool pad to remove the Quick Shine finish off your floor.
Lastly, rinse the treated area with cool water and leave it to dry. After that, jump to another section of your floor and repeat the same procedure.
Side Note: For heavy buildup, you may need to repeat the procedure on the same floor section. You’ll also have to increase the dilution from 1 cup per gallon to 2 to 3 cups per gallon.
Remark: Since you’ll need a lot of elbow grease and aggressive agitation, an agitator mop pad can come in handy.
Windex
Windex is another commercial product you can use to remove Quick Shine from your floor. It’s actually recommended by the individuals who made Quick Shine.
All you need to do is to spray Windex over a section of your floor, let it sit for a minute, and then wipe it with a damp cloth.
Lastly, rinse the treated area and repeat the operation in another section of your floor.
Related: How to Remove Pledge From Wood Floors.
Ammonia
This time, we have a product for you that you probably already have. It’s ammonia.
In a bucket, mix ΒΌ ammonia with 1 gallon of water. Apply the solution with a mop or a sponge. Allow the solution to sit for a few minutes before rinsing it with hot water. Avoid leaving the mixture for too long, especially if you have laminate floors.
Please keep in mind that ammonia is corrosive and can cause severe health issues. Therefore, we strongly advise wearing rubber gloves and keeping your workspace well ventilated.
Remark: Do not use ammonia on hardwood floors. Doing so will more likely dull or scratch your floor’s finish. If you want to remove Quick Shine from your hardwood floor, we recommend using one of the two approaches mentioned above.
When Should You Hire a Cleaning Service?
If you don’t feel comfortable doing this task alone or just don’t have the energy to do it, we recommend hiring a professional cleaning service. Bear in mind that removing Quick Shine off a floor is a laborious process.
Something I’d like to emphasize is to avoid using random products just to remove Quick Shine off your floor. I know it’s tempting, particularly given the cost of hiring a cleaning company, but remember that certain chemicals can cause irreversible damage.
Conclusion
We hope you were able to get Quick Shine off your lovely floor. Don’t forget to leave us a comment below, sharing with us your experience with Quick Shine.
You can also sign up for our weekly newsletter to get unique cleaning hacks that will take your cleaning skills to the next level.
Have you found a new method for removing Quick Shine from your floor? Then why not share it below so that others may achieve the same success as you?
How long does Quick Shine last on floors?
The longevity of Quick Shine on floors can vary depending on several factors such as the type of flooring, the amount of foot traffic, and the cleaning frequency. Generally, Quick Shine is designed to provide a high-gloss, protective finish that can last for several months with normal use. However, factors such as excessive wear and tear, harsh cleaning chemicals, and high humidity can cause the finish to wear off more quickly.
Does vinegar remove floor polish?
Yes, vinegar can remove floor polish. Vinegar is an acidic substance that can break down the chemicals in the polish, causing it to dissolve and become easier to remove. However, it’s important to note that vinegar can also strip away the protective coating on some types of floors, such as hardwood, so it should be used with caution.
How do I remove Quick Shine from Windex?
To remove Quick Shine from Windex, you can try using a mixture of warm water and dish soap. First, mix a few drops of dish soap with warm water in a bowl. Then, dip a clean cloth into the mixture and wring out any excess water. Gently rub the cloth over the area where the Quick Shine and Windex are present until the residue is removed. Rinse the cloth with clean water and wipe the area again to remove any soap residue.
Is Quick Shine good for floors?
Quick Shine is a popular product for adding a glossy finish to floors. Many people find it to be effective at creating a shiny and durable protective layer on their floors. However, like with any product, it is important to read the label and use it according to the instructions.
How do you remove floor gloss?
To remove floor gloss, you can use a floor stripping solution that is specifically designed to break down and remove wax, sealers, and other types of floor finish. Follow the instructions on the stripping solution carefully, and be sure to ventilate the area well as these solutions can produce strong fumes. After applying the solution, you will likely need to scrub the floor with a scrub brush or machine to loosen the gloss, and then use a mop and clean water to rinse the floor thoroughly. Once the floor is dry, you can apply a new coat of finish if desired.
We're an affiliate
We hope you love the products we recommend! Just so you know, CleanyHome.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by linking to Amazon.com.
Quick shine has ruined my laminated floors. They are not even a year old. Thought I would add a little shine to it. It is streaked and blotched and now I have to knock myself out by trying to remove this mess. Very disappointed in this product.